Unit on the left is for heating (30kW) and tap water (0.4
l/s) in a single house or for an apartment.
Unit on the right is used in an apartment house up to
600 kW and tap water flow of 3 l/s.
DH39
We are using Integrated Circuit (IC). That means that we
have several heat transfer areas integrated in same heat
exchangers. For DH39 special made for District Heating
for home owners this heat exchangers produce
radiator heating and hot water is same unit, we are
taking more energy from the
district hot water then any other so far have done. Without
this technique it's necessary to use three heat
exchangers instead.
DH39
Matilda
Using same technique as in DH39,
optimized for apartment houses up to 230 kW and tap
water up to 2 l/s. This heat exchanger is so far the
only heat exchanger where the hot water circuit is
integrated in an optimized place in the heat exchangers.
DH59
Same technique as DH39 but bigger size. This
units have been in the market for more than 5 years.
This unit have given the costumers lower costs because
of lower flow rate.
Singel heat exchangers
For Tap water applications we can recommend the H-models.
For Radiator water applications we can recommend the L-models or
LH-models.
District
Heating 
DH39
