760 kW of cooling, using 19 pieces of EC59-80. Each unit has less than 3 kg of R407c

 HP39 We are using Integrated Circuit (IC). That means that we have several heat transfer areas integrated in same heat exchangers. For HP39 special made for heat pumps have hot gas, condenser, under cooler, ejector, evaporator and super heater all integrated in one unit. Without this technique it's necessary to use four heat exchangers instead.
  EC39 Using same technique as in HP39 without hot gas heat, optimized for chillers and for standard heat pumps.
  EC59 Same as EC39 but bigger size. Used for freezers down to -35°C using 404a. As chiller cooling power up to 80 kW, for 40 kW less than 3 kg refrigerant can be used.  
  EC89 Same as EC39 and EC59 but bigger size. Used for freezers down to -35°C using 404a. As chiller cooling power up to 160 kW, for 70 kW less than 3 kg refrigerant can be used.  
  M89 Is optimized as Evaporator prepared for ejector. This make the distribution perfect.  
  H259 Will be used as evaporator and condenser for big chillers up to 1 MW. The distribution will be solved with our ejector system.
 


Condensers
Model H39, H89 and H259 will be highly efficient as condensers, this model is using drop dimples as pattern instead of herring bone pattern. The drops pattern avoid the risk of gas blocking in the condenser. 



©2006, TauEnergyProducts. All rights reserved. Designed by pixelGUISE.